Turntables

A turning conveyor device intended for changing direction of pallet transport (usually by 90°). We offer it in various designs to suit each customers application.

The turntable design is based on the roller conveyor modules. Atop of the turntable is mounted a frame of 1.522 mm long roller conveyor. This allows for maximal modularity in the conveying line design. Non-driven rollers are placed at both ends of the conveying line. These allow for the smooth transfer between the turntable and connecting conveyors.

The rotary part is mounted upon the stationary part. The two are connected by means of a ball-turn bearing. The turning itself is driven by a motor atop of the conveyor for easy access.

Technical specification

Roller type:Interroll, ∅ 88,9 x 2,9 - 5/8" - B15
Roller step:127 mm
Transmission:Roll-to-roll Chain loops S 5/8"
Conveying width (mm):1.100 (1.300 optional)
Overall diameter: 2.028 mm (for standard width)
Minimum TOR (top of roll):450 mm
Maximum TOR (top of roll):700 mm
Rotation angle:up to 360°
Frame:Hot dip galvanized – 5mm thick plate
Rotation motor:placed above conveyor level for easy access.
Maximal load:1.500 kg
Drive:SEW gear motor – transmission to rollers with chain loop over 2 rollers and motor.
Externity rollers are non-driven.
Standard conveying speed:13 m/min (full pallets)
20 m/min (empty pallets)

Additional elements - safety covers

The safety covers make the design CE safe and therefore requiring no fencing. These are mounted on the statical part of the conveyor. Close alignment with the rotary part ensures there are no risks of injury.

turning table for pallets

Certification

Contact